When it comes to accessories on side by sides, it can become extremely difficult to install all the lights and accessories that you want. Even with factory busbars, installing switches can become overwhelming. That's why at Everything Can-Am Offroad, we offer products such as this Trigger Six Shooter Accessory Control System with RF Remote Control. With this product you will be well on your way to accessory control domination.
Designed to be a one stop shop for all things accessory, this Trigger Accessory Control System stands ready to get your wiring and switches under control. This is done by installing the Trigger control box to your machine and in turn plug your accessories to the included Trigger accessory harnesses. Once you have them wired to the supplied harnesses, you can control them via one of the three accepted control methods. From Bluetooth app controls, manual switches on the control box to the included RF remote, you have multiple options to turn your accessories on and off! So, for those who like everything to be user friendly and wiring to look professional and easy to work on, grab this kit and get set on the path to success.
Features:
- Eliminates the need to run wires under your dash or through the firewall when wiring accessories
- RF remote control activates installed accessories from outside vehicle
- Fused circuits with LED indicators notify of blown fuses
- Accepts 12-24 volt input
- Two 10 amp fused circuits w/12-24 volt output
- Two 30 amp fused circuits w/12-24 volt output
- Two 5 amp fused circuits w/12-24 volt output
- Includes 6 wire harnesses with waterproof connectors
- Wireless back-lit RF remote switch module
- Control from your mobile device with our free app
- Several control boxes can be used together to control up to 24 accessories
Optional ACS DIN Connector Harness:
Are you tired of not having a system that allows you to use the rockers you already have for your accessories? With this ACS DIN Connector Harness, your problem is solved! With this cable, you will be able to use the remote, your rockers and the APP simultaneously without any issues. You will not have to stick with one or the other and keep holding on to those limitations
- Allows manual control of conventional rocker switches
- Wire Color Codes:
- Ch 1 = Red
- Ch 2 = Green
- Ch 3 = Blue
- Ch 4 = Yellow
- Ch 5 = White
- Ch 6 = Brown
- Ground = Black
Note:-When installing the DIN cable to the controller, be sure power is off before inserting the connector. The yellow wire on the controller is power on/off, be sure it has no power going into it before connection.
Featured Blog Post: Make sure you get the right lights for the job and learn how to wire them correctly by checking out this blog post of ours!
