Can-Am Complete Plow System by KFI Open Trail

Can-Am Commander/Maverick/Defender KFI Plow System by Open Trail

With Can Am's origin in the great white north it is no wonder these UTVs make great snow plowing machines; give them the proper equipment and they are good to go. The KFI Open Trail Plow System would qualify as the proper equipment. The KFI Open Trail Plow kit will give your Can Am the power to plow your driveway in no time and will save your back from hours of shoveling. Plow kits are available for all models of Mavericks, including the X3 or Maverick Trail, as well as all Commanders and Defenders.

Plow Kit comes complete with:

• (1) Plow Blade (your choice of size)
• (1) UTV Push Tube
• (1) Vehicle Specific Mount (make sure to select your correct vehicle above)

All Plow Components Feature:

• Complete installation instructions included
• All mounting hardware included
• KFI satisfaction guaranteed
• 2-Year KFI Warranty
• Powdercoated for maximum durability
• Components are metal bead blasted before they are powder coated for the best possible finish prep.
• 100% Made in the USA

**IMPORTANT NOTES**

• Will not work with Maverick 1000 Turbo XDS and XRS models with aluminum front bumper
• Does NOT include winch or winch mount
• 60" blades do not include 2-ply top rubber flap, must be purchased separately

Straight Plow Blades

• Available sizes:
  • 60" STRAIGHT BLADE (10-5060)
  • 66" STRAIGHT BLADE (10-5066)
  • 72" STRAIGHT BLADE (10-5072)
• Pushes snow straight ahead or to the sides up to 25 degrees
• Added gusseting for the wider width and heavier UTV
• Includes a 7" high 2-ply top rubber flap
• Measures 16" Tall and 60", 66" or 72" Wide
• Fully-adjustable blade skids with bolt-on brackets
• Heavy duty 3"-diameter grade-50 steel skid plates
• Blade Constructed of 11 ga steel
• 3/16" Grade 50 Ribbing for a strong bolt-up to the Swivel Tube
• 2-Sided 3/16" x 3.00" Grade 50 Steel Wear Bar
• Wear Bar attached with Heavy Duty Grade 8 Bolts

Pro-Poly Plow Blades

• Available sizes:
  • 60" ATV / UTV Pro-Poly Series Plow Blade - #105860 - (81 lbs.)
  • 66" UTV Pro-Poly Series Plow Blade - #105866 - (82 lbs.)
  • 72" UTV Pro-Poly Series Plow Blade - #105872 - (87 lbs.)
• 3/16” Grade 50 Steel Rib and Frame construction
• Shot Blasted and Powder Coated Black Steel Frame
• Flexible Heavy Duty Black Poly face
• Same weight as steel blades
• 2-Sided 3/16” Grade 50 Steel attached with Grade 8 bolts
• Includes Plow Markers
• Replaceable Blade Face
• 66” and 72” Options
• Includes snow flap
• Dual Curvature face for supreme snow moving
• 21” Vertical blade face height with an approximate 27” height with snow flap
• Works with current KFI No.105635 UTV Tube System
• Heavy Duty 1/2” thick Adjustable Skids

Pro 2.0 UTV Push Tube (106300):

• Improved Manufacturing
• Easier Install for All Plow Accessories
• Added 2.5" Of Overall Length
• Works With All KFI Plows
• Front Mount Design with 30"+ of lift height
• Heavy Duty 1-1/2" 12 Gage Square Steel Tubing
• Heavy Duty 1/4" Thick 1-1/2" Diameter Grade 50 Pivot Bushings
• 6" Diameter POM Injection Molded Rotator Bushing
• Easy-Pull Pin Blade angle adjustment
• Multi-position Plow Lift Bracket
• 6 five-degree blade pitch adjustments
• 3 blade angle positions that rotate the blade up to 25 Degrees

Model Specific Plow Mount:

• Front-Mount System
• Plate constructed from 3/16" Grade 50 Steel
• All Pin Tabs are constructed from 1/4" Thick Grade 50 Steel
• All Plow tabs are tapered to help reduce hang-ups while trail riding

** Actual Plow Mount may look different than reference photo shown **

OPTIONAL ADD-ONS

4500lbs Winch Kit:

• Standard (#U45-R2) - 38' Steel Cable #UTV-CBL-4K
• Wide (#U45w-R2) - 52' Steel Cable #UTV-CBL-4K
• Kit inclusion:
  • Steel Cable
  • Handheld 14' Corded Remote(ATV-HR)
  • UTV Dash Rocker Switch (UTV-DRS-K)
  • New Heavy Duty Electric Contactor (ATV-CONT)

Model Specific Winch Mount: 

• Constructed of 3/16" Grade 50 steel
• Powder coated black for supreme durability
• Very easy to install
• Mounts winch tucked back behind front bumper
• Satisfaction guaranteed
• Roller fairlead and winch are NOT included

** Actual Winch Mount may look different than reference photo shown **

Hydraulic Actuator (Angle) Kit:

• Specifically designed for use with KFI UTV Pro 2.0 Push Tubes #106300 / Open Trail Tubes #10-6300
• Parker Industries Made in the USA Electric (12 volt) over Hydraulic Cylinder
• Complete wiring kit with Carling Technologies Two-Way Dash Rocker Switch
• Powder Coated TOUGH
• Does NOT include the Tube System #106300 (Purchase separately)
• Hydraulic Angle Kit for Machine with Tires  (106305/105940/ACT203)
• Hydraulic Angle Kit for Machine with Tracks  (106335/105940/ACT203) - Requires UTV Track Extension (106330), must be purchased separately
  

UTV Plow Tube Track Extension (106330): 

• Designed to work with KFI UTV Tubes (106300 & 105635) and KFI CC Conversion Push Tubes (106310 & 105905)
• Constructed of Heavy Duty 1/4” Grade 50 Steel
• Extends UTV Blade 10.33”
• Shot Blasted before powder coating; Powder Coated TOUGH - Black
• Replacement for #105565

Plow Markers:

• Increase your blade end visibility for added safety
• Bolts to the side/ends of your blade
• Includes two markers
• Standard Blade Plow Marker Kit (105640) - has a steel 89-degree angled base ; 15.5" length  0.5 " diameter
• Pro-Poly Plow Blade Marker Kit (105810) - has a straight base

Flap Kit:

• 11-Gauge Steel Adjustable Snow Flap Edge Strip
• 6.5” 2-3ply Rubber Flap (acts as a snow flap as well as an extension to the plow blade)
• All KFI Blades are Pre-Drilled
• Two-way Adjustable
• 60" Snow Flap (105144)
• 66" Snow Flap (105835)
• 72" Snow Flap (105290)

Side Shield:

• Attaches to the ends of the plow to help reduce snow and dirt overflow
• 3/16” Grade 50 Steel Powder Coated Black
• Pro-S Side Shield - Tapered Wing for Standard Blade (105540) -- Adds 2-1/4” Width to size of blade per Shield
  
• Pro-Poly Tapered Side Shield - Driver Side (106110) -- Adds 5.6” Width to size of blade per Shield
• Pro-Poly Tapered Side Shield - Passenger Side (106115) -- Adds 5.6” Width to size of blade per Shield