Increase Your Rear Suspension
There will come a time when the job in front of you is too demanding for your stock A-arms. That's why you need SuperATV's Can-Am Defender HD9 Atlas Pro Rear Offset A-Arms. They're nothing like you've seen before, measuring 0.5" larger than your stock A-arms and 0.25" larger than our standard rear offset A-arms. They're hefty and strong, increasing your clearance and giving your Defender a look of total domination. Combine our 1.5" diameter tubing with our 1.5" rear offset and you'll be unstoppable. Plus, you can run up to 30" tires in the rear.
Unmatched Atlas Pro Tubing
If you want to be the biggest and baddest machine on the trail, then you need the A-arms to support that. Thanks to our clever design, the tubing measures 1.5" in diameter with walls .138" thick. This gives you the strength and stability for those hellish rides with the boys. And if an increase in size wasn't enough, we've powder coated them for added durability.
Rear Offset = More Stability
The design of these Can-Am Defender HD9 control arms gives you an additional 1.5" of ground clearance. With increased ground clearance, you can roll over logs and boulders that you used to avoid. They come with a 1.5" rear offset, adding length to your wheelbase by moving the wheel hubs 1.5" backward. The offset allows you to run up to 30" tires without adding a lift kit. You'll have your buddies begging you to give them a head start.
We're so confident in our A-arms that we're selling them with a lifetime warranty. So ride how you want, knowing we've got your back.
Adjustable Pivot Blocks
Our high-clearance A-arms also come with adjustable pivot blocks, allowing you to change your camber. Paying attention to camber is very important when adding a lift kit or larger tires. You'll want to adjust it to eliminate premature tire wear. We take it one step further by pre-adjusting your pivot blocks to match your machine's stock specifications, so you don't have to mess with them if you don't want to.
A-Arms Features
- Adds 1.5" of rear offset
- Fit up to 30" tires
- Made with 1.5" x .138" wall steel DOM tubing
- 0.5" larger than stock
- 0.25" larger than our standard High-Clearance 2" Rear Offset A-Arms
- Utilizes stock A-arm bushings
- UV-resistant powder coat finish
- Easy to install
