close
close
Choose Your Ride Select Your Model
Maverick X3

Maverick X3

Maverick

Maverick

Commander

Commander

Defender

Defender

Shop By Model

2 & 4 Person Systems

Whatever uses you may have for 2-person or 4-person communication systems, we’ve got the right ones for you and your Can-Am Defender. Don’t get stuck with a choppy, inferior UTV communication system, and don’t get a system that doesn’t meet your needs. If you have a two-seat Defender, chances are you don’t need a 4-person communication system. Similarly, if you have a four-seat Defender, running a 2-person communication system will exclude some of your passengers. So get it right the first time with a two or four person Can-Am Defender communication system from Everything Can-Am Offroad. But even if you start with a 2-person system, depending on which one you choose, you may be able to add capacity at a later date should your situation change. Our complete 2 and 4 person comm kits come stacked with all the requisite components, from microphone headsets and radios to intercoms that quickly and easily plug right into the electrical system of your Defender.

Using your Defender as a work machine and want the ability to contact your crew? A four-person communication system can help with that. Going on a hunting trip and want a way to keep tabs on your hunting buddy, a two-person communication system is the perfect solution for such a use. Get directions from your co-pilot in the passenger seat or tell the UTV ahead of you that you’re pulling over for a pit stop. We have 2 and 4 person systems with in-helmet devices for wireless connectivity as well as headsets that can be used both outside and within your UTV. With comm systems that are powerful, clear, and durable, you won’t be disappointed with what you find at Everything Can-Am Offroad. Get one for your Defender today and stay connected with the ones you care about!

And what about small parts, should you bring some of those along as well? Short answer, yes. A belt is good to have on the machine at all times, and having an axle in the bike or at the very least the truck is also good. It’s hard to know exactly where to draw the line with what to bring, but you definitely need to have room for a cooler full of beverages no matter what. And don’t forget to bring a clutch tool for changing the belt, electrical tape, crescent wrenches, and hose clamps.

Regarding at-home Can-am Defender tools, a grease gun is a must for greasing up wheel bearings. If you’re doing any work on the clutch, be it either the primary or secondary, you’re going to need a special CVT clutch tool if you want to do it right. This tool loosens the belt up by spreading the secondary sheaves, making it so that when you put it all back together, you can do so much easier and, more importantly, correctly. Your Can-Am Defender clutch isn’t something you want to cut corners on, especially since it is your main source to make a machine move. Of course there are ways around using specialized UTV tools, but for what they cost we would without a doubt just recommend buying the right tools to get the job done right the first time.

Shop 2019 Defender Models: 2019 Defender Tools / Accessories | 2019 Defender MAX Tools / Accessories

Shop 2020 Defender Models: 2020 Defender Tools / Accessories | 2020 Defender MAX Tools / Accessories

Shop 2021 Defender Models: 2021 Defender Tools / Accessories | 2021 Defender MAX Tools / Accessories