close
close
Choose Your Ride Select Your Model
Maverick X3

Maverick X3

Maverick

Maverick

Commander

Commander

Defender

Defender

Shop By Model

Wire Harnesses

“It won’t take long into your effort to become fully street legal before you begin to grow in your appreciation for high-quality wire harnesses, whether you already have one of our Can-Am Defender wire harnesses and you love it or if you are struggling with an inferior setup. If you find yourself in the latter party while trying to hook up all the horns, lights, turn signals, and other accessories you need to become street legal, take a deep breath and have a sit. We’ve got just the plug-and-play setups you need from top brands like Quake LED, XTC Power Products, UTV Inc, and more. Our goal is to give you unfettered access to all of your equipment without having to splice or deal with any other time-consuming modifications and chores. Thanks to these brands, we met that and then some. When browsing these Can-Am Defender wire harnesses, it’s important for you to have a plan of action at least partially laid out as far as where you want to wire what, because you almost always have multiple options at your disposal. For example, you can run your street legal accessories directly to the battery or to the ignition power, which many riders prefer because it cuts down on unwanted battery drain. Either way you decide to go, you can streamline this whole process to be easier, more effective, and safer using the right Can-Am Defender wire harness. One battery or two, busbar or not, Everything Can-Am Offroad will work with your existing electrical system and your preferences to deliver the perfect Can-Am Defender wire harness for you. “

  • Can-Am 5 Pod Power Wire Harness by Quake LED

    Can-Am 5 Pod Power Wire Harness by Quake LED

    $32.98

    Can-Am 5 Pod Power Wire Harness by Quake LED Deutsch DTP06-2S DT connectors 12 Feet Long, 18AWG Red/Black Wires Off-Road Durable wire construction Max 10AMPS at 12VDC Details: 12 Foot Red/Black

  • Can-Am 5 Pod RGB Wire Harness by Quake LED

    Can-Am 5 Pod RGB Wire Harness by Quake LED

    $24.98

    Can-Am 5 Pod RGB Wire Harness by Quake LED Deutsch DTP06-2S DT connectors 12 Feet Long, 18AWG Red/Black Wires Off-Road Durable wire construction Max 10AMPS at 12VDC Details: 12 Foot Red/Black RGB

And what about small parts, should you bring some of those along as well? Short answer, yes. A belt is good to have on the machine at all times, and having an axle in the bike or at the very least the truck is also good. It’s hard to know exactly where to draw the line with what to bring, but you definitely need to have room for a cooler full of beverages no matter what. And don’t forget to bring a clutch tool for changing the belt, electrical tape, crescent wrenches, and hose clamps.

Regarding at-home Can-am Defender tools, a grease gun is a must for greasing up wheel bearings. If you’re doing any work on the clutch, be it either the primary or secondary, you’re going to need a special CVT clutch tool if you want to do it right. This tool loosens the belt up by spreading the secondary sheaves, making it so that when you put it all back together, you can do so much easier and, more importantly, correctly. Your Can-Am Defender clutch isn’t something you want to cut corners on, especially since it is your main source to make a machine move. Of course there are ways around using specialized UTV tools, but for what they cost we would without a doubt just recommend buying the right tools to get the job done right the first time.

Shop 2019 Defender Models: 2019 Defender Tools / Accessories | 2019 Defender MAX Tools / Accessories

Shop 2020 Defender Models: 2020 Defender Tools / Accessories | 2020 Defender MAX Tools / Accessories

Shop 2021 Defender Models: 2021 Defender Tools / Accessories | 2021 Defender MAX Tools / Accessories