Can Am Maverick X3 (72" models) Front Forward Upper Lower Control Arms By Highlifter
Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don't be fooled with too much arch that puts your axles into greater risk of damage. Our precision manufacturing process ensures each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precision cut into the bracing.
Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation. Even better, High Lifter will install your ball joints before shipping. (See our control arms with preinstalled ball joints.) Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. See the Replacement Parts Tab to purchase replacement parts as needed.Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires.
Features:-
- 25% larger than average stock arms - Crafted from 1 ¼” DOM steel
- Up to 2.5x the wall thickness of an average stock arms - .188" wall thickness
- Grease fittings included for most models
- Added ground clearance featuring bends that maximize clearance and axle protection
- Most stock powder coat colors available in stock
- Easy to install and maintain
- Limited Lifetime Warranty
Tire Fitment:-
- Up to 35"
- With Lift & Forward Kit- Up to 38"
- Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
Note:-If you are running wider lug tires on factory wheels - they will rub against the shock. Wheel spacers or offset aftermarket wheels are needed.
Can Am Maverick X3 (72" models) Front Forward Upper Lower Control Arms Fitment
- 2017 Can-Am Maverick X3 XRS
- 2017 Can-Am Maverick X3 MAX XRS
- 2018 Can-Am Maverick X3 Turbo R XRS
- 2018 Can-Am Maverick X3 Turbo R MAX XRS
- 2018 Can-Am Maverick X3 Turbo R XMR
- 2019 Can-Am Maverick X3 Turbo R XMR
- 2019 Can-Am Maverick X3 Turbo R XRS
- 2019 Can-Am Maverick X3 Turbo R MAX XRS
2017 Can-Am Maverick X3 XRS
2017 Can-Am Maverick X3 MAX XRS
2018 Can-Am Maverick X3 Turbo R XRS
2018 Can-Am Maverick X3 Turbo R MAX XDS
2018 Can-Am Maverick X3 Turbo R XRC
2019 Can-Am Maverick X3 Turbo R XDS
2019 Can-Am Maverick X3 Turbo R XMR
2019 Can-Am Maverick X3 Turbo R XRC
2019 Can-Am Maverick X3 Turbo R XRS
2019 Can-Am Maverick X3 Turbo R MAX XDS
2019 Can-Am Maverick X3 Turbo R MAX XRS
2020 Can-Am Maverick X3 Turbo R XRS
2020 Can-Am Maverick X3 Turbo R MAX XRS
2020 Can-Am Maverick X3 Turbo RR XRS
2020 Can-Am Maverick X3 Turbo RR XRC
2020 Can-Am Maverick X3 Turbo RR XMR
2020 Can-Am Maverick X3 Turbo RR MAX XRS
2020 Can-Am Maverick X3 Turbo RR MAX XMR
2021 Can-Am Maverick X3 Turbo R RS
2021 Can-Am Maverick X3 Turbo RR XRS
2021 Can-Am Maverick X3 Turbo RR XMR
2021 Can-Am Maverick X3 Turbo RR XRC
2021 Can-Am Maverick X3 Turbo MAX R RS
2021 Can-Am Maverick X3 Turbo MAX RR XRS
2021 Can-Am Maverick X3 Turbo MAX RR XMR
