Can-Am Maverick X3 AA S2 Clutch Kit by Aftermarket Assassins

Our S2 X3 clutch kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner. In the dunes, you'll see the same benefits, but also have much less bogging when climbing that big dune.

The machine will hold RPM so you can get where you need to go and get there faster! Going mudding? Our mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that's key to climbing out of that hole. Are you a rock crawler? Our smooth engagement and precise feel down low will give you the confidence to tackle any obstacle. We have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world. We know you'll be extremely pleased with the performance gain from our clutch kits!

S2 Clutch Kit Features:

• Big performance gains as these 3 cylinder motors love to rev! The factory clutches these heavy, making them ramp up RPM slowly. Once you ride a properly clutched X3 that ramps up RPM quickly, you'll see the major difference.
• S2 kits include our AA Recoil magnetic adjustable clutch weights, our primary spring & setup guideline.
• Our setup guideline will let you know how to set your weights for stock horsepower to 200rwhp, 28" - 32" tires, 28-32" paddle tires, different altitudes more.
• Fully adjustable magnetic weights are easy to use, and with our special tool are also easy to adjust
• Adjustable from 50 to 64 grams. Weights have more tip weight and act heavier. This means they also accelerate and upshift much harder.
• A must-have when changing tires, tuning your machine, or running paddles
• Cooler running belt temps from a more efficient power transfer which results in longer belt and clutch life. With this kit and our Stryker belts (gboost belt), we have ran thousands of hard miles in the dunes & trails at higher horsepower with ZERO belt failures.
• Big acceleration gains a better power transfer to the rear wheels.
• Close to stock engagement which is very smooth (Higher engagement springs available if needed)
• Select your exact year/model which lets us know what weights to send you as the clutch casting is different between some years and models. 2017 X3's and 2018 120HP Base X3's (Kit 108-1008-A) use the same clutch movable sheave casting(OEM Part #420280608), while 2018+ 172HP X3's (Kit 108-1008-B) use the new style clutch casting(OEM Part # 420280461) with the metal sliders. This is a very minor change, but our weights are tight enough to need proper clearance for each specific casting. If you upgraded your older style casting to a new one, please let us know in the order notes.
• Our Recoil clutch weights are easily adjustable with simple magnets. They have a custom AA profile, the BEST coating on the market(nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance, and the ability to tune for many different applications or modifications in the future, without the need to buy extra parts. The magnetic weights are the best option to properly place the mass where we need it on the weight for the best performance for your application.
• We found the stock secondary clutch to work very well. Once we have helixes available, you'll see our S3 clutch kits come out with the helix/spring.
• Target peak RPM for stock or any other tune with the rev limit set between 8300-8700 RPM is 7700-7900 RPM. For AA tunes and other tunes with an 8800-9000 RPM rev limit, the target should be 7900-8300. Testing should be done on somewhat level ground from a 10-20mph roll on to full WOT and RPM checked as passing by 55-60MPH.
• The kit will work on any 2017-2022 Can-Am Maverick X3 Turbo: 120hp, 154hp, or 172hp Base Models: 2 & 4 Seat
• Does not work with RR models (We have a specific kit for those models)

Featured Blog Post: Have a look at our blog on aftermarket Can-Am clutch setups to learn more about clutch kits, clutch upgrades, and replacement clutch parts!