SKU: PM1000X5-ECO
BRAND: Rockford
Power up your marine audio with Can-Am Punch Marine 1000W amp by Rockford - unleash the sound of the seas!
Read More
This is a 1000 Watt 5-channel amplifier with high dynamic power using Class-a/b technology on the front/rear channels, Class-bd for the subwoofer channel, and a conformal coated pc board designed for motorsport and marine applications.
The PM1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.
1000 Watt Class-bd 5-Channel Amplifier Features:
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- 2/4 channel input switch
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
Specs:
- Number of Channels - 5
- Total Power (Sum of Rated Power) - 1000 Watts
- Rated Power (RMS Continuous Power) - 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm, 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm, N/A + 500 Watts @ 1-Ohm
- Dynamic Power (PVC/PowerCube®) - 115 Watts x 4 + 299 Watts x 1 @ 4-Ohms 0° Res, 190 Watts x 4 + 540 Watts x 1 @ 2-Ohms 0° Res, N/A + 863 Watts x 1 @ 1-Ohm 0° Res
- Bridgeable - Yes (front/rear channels)
- Frequency Response - Front/Rear: 20Hz - 20kHz +/-3dB, Sub: 20Hz - 500Hz +/-3dB
- Input Sensitivity - 150 mV - 12 V
- Circuit Topology Class - Class A/B + Class BD (Sub)
- Efficiency (average) - Front/Rear: 66% @ 4-Ohm, Sub Channel: 80% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise) - <1.0%
- Signal Input - Input Switch: Hi/Low level input, Input Switch: 2/4 channel input, Hi/Low Level: 3 RCA Pair, Sub: front/sub input switch
- Signal Output -
- Tone Controls - Sub: 0dB to +18dB @ 45Hz
- Crossover Controls - Front: 50Hz - 250Hz High-Pass @ 12dB/Octave, Rear: 50Hz - 250Hz
- High-Pass @ 12dB/Octave, Sub: 50Hz - 250Hz Low-Pass, Sub: 28Hz infrasonic filter @ 12dB/Octave
- Remote Controls - Optional Punch Level Control (PLC2) Ready
- Visual Indicators - Power/Protect/Thermal LED, Input Clip LED3, Output Clip LED1,2,3 (LED Color Legend: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD)
- Power Wire Gauge - 4 AWG
- Power Input Connector - Block
- Speaker Wire Gauge - 12 AWG
- Speaker Output Connector - Block
- Cooling - Convection
- Heatsink
- Operating Voltage - 9 - 16 VDC
- Recommended Fuse (not included) - 150 A
- Average Current Draw (13.8V Music) - 75 A
- Max. Current Draw (13.8V Sinewave) - 150 A
- Suggested Alternator - 100 A
