High Lifter Portal Gear Lift (Each kit includes 4 portal boxes)
Big Lift Features:-
- 30% Gear Reduction – Gives you greater low-end torque for the trail
- 3Power on Tap – More power to the ground with less engine wind up
- 3Lift It Up – Gain additional 4” lift plus improved track width
- 3Built Tough – Built with 6061 Aluminum and designed for the toughest terrain you can throw at them
- 3Great Ride – Get all the benefits of added torque and better clearance without compromising factory ride or suspension angles
- 3Camber adjusting shims – Adding or removing shims can adjust camber by -1.25° to a +2°
- 3Perfect Machining – We stand behind the quality of our product 100%. The kits have been specially designed and machined to fit your ride perfectly
- 3Slotted Brake Rotors – Slots carved into the flat metal surface move gas, heat and water away from the surface of these rotors to improve braking performance
Wheel Requirements:
- 14" or larger
- 14" factory wheels must run 1" spacer
- 14" & 15" can not exceed 4-1/2" backspacing
- 16" & larger can not exceed 5" backspacing
High Lifter 9" Big Lift
Bigger. Badder. BOLDER. Take your SXS to the edge with High Lifter’s 9" Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate lift kit. The product? The Big Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.
Each lift kit comes with four Outlaw DHT XL Axles that are custom tuned for use with the 9” High Lifter Lift Kit.
Outlaw DHT XL Axle:
- Dual heat treatments on the housings to improve toughness against shock loads without compromising bearing surfaces and long term life
- Oversized CV joint housings to increase strength
- Housings and bars made from 4340 Chromoly steel
- Puncture-resistant boots which are durable in high and low temperature climates
- Molybdenum disulfide, anti-oxidation, rustproof, and high-performance
This 9" lift kit package includes the following components:
- Heavy duty laser cut front and rear upper lift/shock relocation brackets
- Custom engineered Max Clearance Control Arms crafted from 1 1/4"x.120 wall DOM tubing, heavy duty support gussets, and shock mounts
- Four Outlaw DHT XL Axles
- Custom tie rod set up
- Custom rear brake line kit
- All required hardware and brackets
- Detailed instructions with step-by-step photos