Can-Am Maverick X3 Folding Windshield by SuperATV

Can Am Maverick X3 Flip Windshield By SuperATV

Get Three Windshields in One

With a SuperATV Flip Windshield installed on your Can-Am Maverick X3, you get three windshields in one for the ultimate year-round accessory. The three position — closed, vented, and open — you can ride in any weather in any season comfortably. If the weather changes quickly, you're still prepared. Switch between all three positions from the comfort of the cab. It's made from 1/4" polycarbonate with the option for scratch resistant hard coating and standard polycarbonate. It comes preassembled so you can install in just minutes. The perfectly cut windshield matches the hood of your X3 for a snug, rattle-free fit.

Scratch Resistant Polycarbonate

This windshield is made with hard coated, scratch resistant polycarbonate. The hard coating is highly abrasion, UV, and chemically resistant. That means that you can cruise down the trail all day long through mud, trees, bushes, or rocks and your windshield's hard coating will keep it safe. It’s as tough as it gets and you can take your UTV through anything with crystal clarity.

Standard Polycarbonate

Our windshield is available as a non-hard coated standard polycarbonate as well. This 1/4” polycarbonate is still the strongest windshield you can get and won't break under extreme riding. It’s perfect for keeping out the elements for a casual rider.

Made and Assembled in the USA

SuperATV flip windshields come to you pre-assembled. This saves you tons of time in attaching brackets, looking for hardware, and installing clamps. Each windshield is proudly made in Madison, Indiana, where we cut, form, and package each windshield with care.

Features:-

• Available Styles
• Scratch Resistant Polycarbonate
• Standard Polycarbonate
• Scratch Resistant windshields are hard coated on both sides for extreme durability
• Hard coating protects against harsh chemicals and UV rays
• Contoured to hood with full length rubber seal for a rattle-free fit
• Pre-assembled and Easy to install
• Can be used with soft or hard tops
• Made in the USA
• Add an LED Light Kit to brighten your night riding

SuperATV Front Flip Windshield FWS-CA-X3-7X Care Instructions:-

• Create a mixture of mild liquid dish soap and warm water (Recommended UTV windshield washing/cleaning solution)
• Or use Pre-made Can-Am Offroad windshield solution option: 13946
• Take your side by side windshield cleaning solution and wash the UTV window(s), interior, and exterior
• Only use a clean soft, micro-fiber cloth to wipe gently and do not scrub- apply very light pressure ***Do not use a paper towel and Windex***
• Rinse UTV windshields well and air dry
• Let dry for at 30 minutes to 2 hours depending on the humidity level of your location
• Get on that machine and have an awesome time now that you can see!!!
• Stay safe while riding out there and check out Everything Can-Am Offroad for more UTV parts and accessories